 |
Scissor Lifts by Genie are the best available.
A competitively priced alterative to aerial work platforms
and booms, this scissor lift line is built with the benefits
of 30 years experience and applied technology. The GS scissor
lift series is sturdy, offers narrow access capability, slide
out platform extension, quiet electric drives, rough terrian
models and working heights from 21 to 32 feet 9 in. (6.4 to
9.8 m.).
|
GS™-1532 / GS™-1932
|
|
|
|
Nothing beats a
Genie Scissor for performance, safety, serviceability
and value.
- The solid steel deck platform has a slip-resistant
surface.
- Heavy duty tubular steel guardrails maximize
durability. Telescopic end rail can be raised to
accommodate large loads.
- Lubrication-free, service-free pivot points.
- Built-in lanyard attachment points.
- The ergonomic Joystick Controller operates from the
platform or the ground.
- Low noise level allows operation in quiet work
environments.
- High angle steering provides excellent
maneuverability.
- Swing-out battery box and power module allow easy
access to componentry. Variable speed motor extends
battery and motor life by using only the energy needed
to do the required work. On-board troubleshooting
diagnostics notify the operators of possible fault
conditions.
Standard Features
- GS-1532 has 21 ft (6.5 m) working height and GS-1932
has 25 ft (7.8 m) working height
- 39 in (1 m) roll-out platform extension
- Compact 32 in (81 cm) width
- 600 lb (272 kg) lift capacity for the GS-1532 and
500 lb (227 kg) lift capacity for the GS-1932
- Compact design
- Automatic 25 amp battery charger
- Proportional controls for lift and drive functions
- Multiple disc brakes provide smooth deceleration
- Drive speed interlock limits speed while elevated
- Emergency stop at both platform and ground controls
- Manual platform lowering valve
- Manual brake release
- Pothole guards
- Non-marking tires
- AC wiring to platform
- Tilt level sensor with an audible alarm
- Beeper horn
- Hour meter
Options and Accessories
- Motion alarm
- Air line to platform
- Platform swing gate
- Dual flashing beacon
- Maintenance-free battery
Standards Compliance
- ANSI/SIA A92.6
- CSA CAN3-B354.2-M82
- CE compliance option
- AS 1418.10
|
|
GSTM-
4390RT / GSTM- 5390RT |
|
|
- Large platform with durable diamond-plate aluminum
flooring. A single 60 in (1.52 m) multi-position
slide-out extension deck, on the front of the machine,
comes standard. A second 48 in (1.22 m) slide-out
extension deck, on the rear of the machine, is available
as an option.
- Rear platform railing can be removed for easier
loading and unloading of materials.
- Slide-out engine tray allows easy access to
components.
- Automatic leveling hydraulic outriggers are standard
on the GS-5390 RT, optional on the GS-4390 RT.
Standard Features
- GS-4390 has 49 ft (14.9 m) working height and GS-
5390 RT has 59 ft (18 m) working height
- 1,500 lb (680 kg) load capacity
- Positive traction-controlled four-wheel drive
- 50% gradeability
- Proportional drive
- Two-speed lift functions
- Troubleshooting diagnostics
- Two self-closing entry gates
- Foam-filled tires
- AC wiring to platform
- Descent alarm
- Tilt sensor with an audible alarm
- Horn
- Hour meter
Options and Accessories
- Motion alarm
- Dual flashing beacons
- Propane tank kit (single and/or additional)
- Dual slide-out extension deck package (front and
rear)
- Hydraulic oil cooler
- 2,000 watt generator (110 volt/60 hz)
- Automatic leveling hydraulic outriggers (GS-4390 RT)
- Non-marking tires
Standards Compliance
- ANSI/SIA A92.6
- CSA CAN3-B354.2-M82
- CE compliance option
- AS 1418.10
|
For further information of any of these services contact
us now
|
|
